Revision 5.5
47
6.2
EMERGENCY STOP Switch
NOTICE
Do not use the
EMERGENCY STOP
switch
for normal shutdown of the MCO 25 plus.
The
EMERGENCY STOP
switch immediately stops the emission of laser light, section 5.4
“Front Side”, page 29.
Activating the EMERGENCY STOP
•
Press
EMERGENCY STOP
switch.
—
The emission of laser light is stopped immediately.
—
The device is not de-energized.
—
The switch locks in place when pressed.
Deactivating the EMERGENCY STOP
•
Turn
EMERGENCY STOP
switch to the right or to the left until the latch unlocks and the
red switch slides out forwards.
—
You can now continue working with the device.
6.3
Switching Off the Device
•
Press the
key (
STANDBY
).
•
Switch key switch by 90° in counterclockwise direction.
•
Remove key.
•
Store key in a safe location.
6.4
Basic Setting of the Device
The user can adjust the laser parameters as desired.
•
The user can choose between
TIME SETUP
and
Frequency Setup
.
•
5 languages are available.
