Revision 5.5
113
15
Guidelines and Manufacturer’s Declaration Regarding
Electromagnetic Compatibility (EMC)
Guidance and manufacturer’s declaration according to IEC 60601-1-2,
clause 6.8.3.201 a) 3) Table 201: Electromagnetic emission
The device MCO 25 plus is intended for use in an electromagnetic environment as specified below. The
user should assure that it is used in such an environment.
Emission test
Compliance level
Electromagnetic environment – Guidance
RF emissions according to
EN 55011
Group 1
The device uses RF energy only for its internal
function. Therefore, RF-emission is very low and
it is unlikely that any interference is caused in
nearby electronic equipment.
RF emissions according to
EN 55011
Class B
The device is suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic emissions
according to IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions according to
IEC 61000-3-3
Complies
