Laser Surgical Unit diomax
®
Revision 6
23
4
Commissioning
4.1
Function
The device is a microprocessor-controlled laser surgery device according to the latest state of
the art. It produces laser light in the infrared wavelength range (980 nm) with a laser power of
up to 20 W that the user can apply via different laser fibers and applicators.
4.2
Installation
NOTICE
If the device temperature is not in the allowed operating range, the device cannot be
activated.
•
Leave the device in the application room before initial use until it has ambient
temperature. See also section 11 “Tecnical Data”, page 67.
•
When changing locations, make sure that the device temperature has adapted to the
ambient temperature before starting the device.
•
Set up the device on a level surface such as a table or cart.
•
The device must securely stand on all four device feet.
CAUTION
Risk of injury!
For installation on an elevated platform such as a ceiling-mounted supply unit or a slightly
inclined tray, two ball-head safety bolts should be mounted on the plate to secure the device
against shifting. The device has two receptacles for the ball-head safety bolts in its base.
Upon request, ball-head safety bolts are available from the manufacturer.
•
Ensure sufficient ventilation:
—
The cooling air inlets on the bottom of the device must not be covered by table cloths,
blankets or other objects.
—
Keep a distance of at least 20 cm to the wall on all sides to ensure proper cooling of
the laser.
