KLS Martin CEMOR, Mounting Instructions

Page: 30 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
30 Revision 1
6 Combination of CEMOR and Suspension Arm System
The CEMOR monitor suspension system can be mounted to the suspension arm systems
IDP 101 S and IDP 101 S XL. The total weight of CEMOR, VESA brackets, flat screens and
other components must not exceed the maximum payload indicated on the rating plate, see
section 4.1 “Information on the Rating Plate”, page 25.
See section 6.1 “Example: Checking CEMOR and the Suspension Arm System”, page 31 for an
example.
WARNING
Danger of injury due to the suspension arm system falling!
If CEMOR is mounted to an incorrect suspension arm system, the suspension arm system can
fall:
•
Make sure that the assignment of CEMOR to the specific suspension arm system is correct
according to the information on the rating plate, see section 6.1 “Example: Checking
CEMOR and the Suspension Arm System”, page 31.
•
Mount CEMOR to the specific suspension arm system.
CEMOR must not be mounted to any other suspension arm system.