KLS Martin CEMOR, Mounting Instructions

Page: 15 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 15
1.3 Intended Purpose
• The CEMOR monitor suspension system is individually equipped. Depending on the version
and equipment, it can be used for the following:
—
carrying flat screens labelled with a CE mark in OR or intensive care rooms and
medical environments
— transport and withdrawal of media such as medical gases, vacuum and compressed air,
electricity and data (e.g. telephone, nurse call, computer data, etc.).
• CEMOR can be mounted to the suspension arm systems IDP 101 S or IDP 101 S XL.
•
CEMOR is suitable for continuous operation.
•
The suspension arm system may be operated only by qualified medical staff with
appropriate qualifications.
•
The suspension arm system may be cleaned and disinfected only by instructed hygiene
specialists.
• The suspension arm system may be serviced only by the operator’s technical specialists on
the basis of the applicable instructions.
The operator may operate the device only if an on-site functional test has previously been
performed by Gebrüder Martin or a person authorized by Gebrüder Martin. In addition, a
responsible person designated by the operator must have been instructed in the proper
handling, application and operation of the device, as well as in its permissible combination with
other medical devices, objects and accessories. This duly instructed officer shall subsequently
be responsible for familiarizing the operator’s staff with the device as the need arises.
We recommend documenting all user instructions in a medical device logbook. A copy of the
logbook is available from Gebrüder Martin.
The operational safety of the device must be verified at regular intervals, see section 21
“Inspection Plan”, page 80.
1.3.1 Configuration and Inspection Before Mounting CEMOR
The CEMOR monitor suspension system can be mounted to the suspension arm systems
IDP 101 S and IDP 101 S XL. The total weight of CEMOR, VESA brackets, flat screens and
other components must not exceed the maximum payload indicated on the rating plate, see
section 4.1 “Information on the Rating Plate”, page 25.