RS-62
S P E C I F I C A T I O N S
FREQUENCY RESPONSE
50Hz-23kHz ± 3dB
POWER HANDLING
150W RMS / 600W Peak
SENSITIVITY
97dB @ 2.83V / 1m
NOMINAL IMPEDANCE
8 ohms compatible
HIGH FREQUENCY DRIVERS
Dual 1" (2.54cm) Titanium diaphragm
compression drivers mated to 90x60 square
Tractrix
®
Horns
HIGH FREQUENCY CROSSOVER
2000Hz
LOW FREQUENCY DRIVERS
Dual 6.5" (16.5cm) Cerametallic
™
cone woofers
ENCLOSURE TYPE
Bass-reflex via quad side-firing ports
HEIGHT
15" (38.1cm)
WIDTH
14.75" (37.5cm)
DEPTH
9.75" (24.8cm)
MOUNTING
Keyhole bracket and dual 1/4"-20
threaded inserts
WEIGHT
28lbs (12.7kg)
FINISH
Matte Black vinyl
Dual 6.5" Surround Loudspeaker
Adopting a completely new cabinet and driver
layout that is similar to the Klipsch THX
®
Ultra2
KS-525-THX surround speaker, the RS-62
establishes greater output, improved coverage and
increased power handling to further extend
Klipsch’s best-in-class surround sound
performance.
Exclusive Tractrix
®
Horns have always been the
key component of the Reference Series. In the
RS-62, this technology has been refined to include
improved throat geometry for a more genuine,
lifelike sound. Behind the speaker’s dual horns lie
1-inch titanium tweeters with large ceramic motor
structures to provide a unique combination of
precision, clarity and effortless power.
The RS-62 employs dual 6.5-inch woofers for a
solid bass foundation. These Cerametallic™
woofers with inverted copper dust caps exhibit a
very high stiffness-to-mass ratio and superb
damping characteristics.
Klipsch Wide Dispersion Surround Technology™
(WDST) provides crystal-clear sonic detail even
in listening areas with less than ideal configurations.
The Tractrix Horns deliver a 90-degree wide by
60-degree high dispersion pattern. By aligning two
horns at 90-degrees with respect to each other,
WDST smoothly covers a 180-degree horizontal
arc. In other words, the surround sound is pointed
at you no matter where you are seated.
While increased baffle ribbing around the horn
mouth dramatically improves acoustics across the
sonic range, the crossover utilizes Klipsch custom
internal wiring and the finest components to
provide signal purity and perfect driver integration.
Available in a matte black vinyl finish, the RS-62
also features side-firing ports to eliminate
turbulence noise and back-panel keyholes and
1/4" threaded inserts to simplify installation. A low-
diffraction, magnetically attached grille further
accentuates the elegance of this speaker.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
• Ultra-high-performance surround speaker
• WDST
™
design for maximum coverage and ease of placement
• Clean, contemporary shape for minimal room intrusion
