KLINGER Minimag, Operation Manual

Page: 19 / 20

Klinger Minimag
Operation Manual
KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk
Side 19
4130 1022 Alarm status uchar 1
4131 1023 Temperature/Pressure float 2
Float format:
IEEE754 Float Inverse
2.7 Parameter Register Address: Read:0X04 function code, Write: 0X06 function code
Register Address
Parameter format bytes
Register Address
parameter format bytes
Dec Hex Dec Hex
32 20 language uchar 01 55 37 EmpPipe Alm (K ) uint 01
33 21 Pipe size(mm) uchar 01 56 38 Input control uchar 01
34 22 Flow range float 02 57 39 1# Output uchar 01
36 24 Flow unit uchar 01 58 3A Hi Alm Limit (%) uint 01
37 25 Flow range auto change uchar 01 59 3B 2# Output uchar 01
38 26 Damping uchar 01 60 3C Lo Alm Limit (%) uint 01
39 27 Flow direction uchar 01 61 3D Clr Tot. Key uint 01
40 28 Flow zero sign(+/-) uchar 01 62 3E Sensor S/N char[] 06
41 29 Flow zero uint 01 68 44 Sensor Factor uint 01
42 2A Low flow cutoff (%) uint 01 69 45 Field Mode uchar 01
43 2B Cutoff enable uchar 01 70 46
Flow density(t/m )
uint 01
44 2C Rate-Of-Chng (%) uchar 01 71 47 Multiplying uint 01
45 2D Limit Time (s) uchar 01 72 48 Current Zero uint 01
46 2E Total Unit uchar 01 73 49 Current Max uint 01
47 2F Flow decimal point uchar 01 74 4A Meter Factor uint 01
48 30 Pulse type uchar 01 75 4B Converter S/N char[] 05
49 31 Pulse factor uchar 01 80 50 F. Total Set char[] 05
50 32 Pulse width uchar 01 85 55 R.Total Set char[] 05
51 33 Frequency max uint 01 90 5A Date char[] 03
52 34 Comm address uchar 01 93 5D Time char[] 03
53 35 Baud rate uchar 01 96 60 RevMeas.Enbl uchar 01
54 36 EmpPipe Det. uchar 01 97 61 Remote resetting total uint 01
121 79 PT Select uchar 01
122 7A T. Zero float 02
124 7c T.Max uint 01
Note: The parameter sn- part of the converter is invalid Some of the parameters have a
write-only function