Page 18 of 30
Version 1.3
© KLING & FREITAG GMBH
User's Manual
K&F
VIDA M Accessories for Mobile Use
4.3
Using the M10 Stand Sleeve for Speaker-Stand
Placement
WARNING
Risks imposed by falling parts
•
This use case is suitable for VIDA M 110 / 110 S speakers only.
The VIDA M 220 / 220 S is not approved for use on a stand as that would overload the
configuration.
1. Screw stand sleeve
[A]
with cen-
tering disk
[B]
and M20 lock
washer
[C]
to the middle M10
thread hole of mounting adapter
[C]
and tighten it.
2. Place the speaker onto a stand of
adequate size and stability. (This
must be done by two persons.)
3. Fasten the speaker using the
hand wheel of stand-sleeve
[A]
.
