Data ultimo aggiornamento: 04/04/2018
Pag. 32 di 56
PLANETARY ACTIVATION
With the clutch selector in position "STOP" the engine turns in neutral and does
not transfer the motion to the tools through the Planetary.
By turning the clutch Selector [photo 13 – A] in "START" position [Photo 8 – A]
the clutch is engaged and starts the Planetary rotation[Photo 6 – C] and utensils
[Photo 6 – A].
ATTENTION! The Planetary activation, which is obtained by rotating the selector
switch to "START" clutch may cause an initial shake of the machine. At this stage
keep hands firmly on the handle and take adequate and stable posture.
ATTENTION! With the rotation of the planetary and of the tools the surface
treatments begins.
REGOLAZIONE DEL FLUSSO DELL’ACQUA / WATER FLOWING REGULATION /
REGLAGE DU FLUX D’EAU / REGOULIERUNG WASSERSTROM / REGULACION
DEL FLUJO DEL AGUA
Flusso Acqua
: Nel caso di lavorazione con acqua la portata può essere
regolata tramite il rubinetto [Foto 14 –A] posto nella parte anteriore della
macchina indicato in figura.
F o t o 1 4 / P i c t u r e 1 4
Water flow
: when working with water, the flow rate can be adjusted with
the valve [photo14– A] placed in the front of the machine shown in the figure.
A