2
flame cutting table
SCT-2100
10.01.2019
1.
Introductory Remarks
The purpose of the present
Use
and Maintenance Manual is to supply User with directions wi-
thin the range of application, installation, start-up and the use of the
SCT-2100
flame cutting
table
.
Installing, start up and operational use are exclusively admissible after getting acquaint-
ted with the contents of the Use and Maintenance Manual
.
With regard to continuity of work carried on
improvement
of our
products, we reserve for oursel-
ves the revision possibility of the
draft and
technological changes improving their functional
features and safety.
Construction of the
SCT-2100
flame cutting table
meets
the
requirements of the current state
of
technology
as well as the safety and health assurances included in:
2006/42/EC
Machinery Directive
of the European Parliament
and of the Council of
May 17
th
,
2006 on machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/
Additionally, the appliance meets following harmonized standard:
●
EN ISO-12100:2012
–
“Safety of
machinery
–
Basic concepts, general
principles
for design. Risk assessment and risk reduction”
2.
Application
Flame cutting table
SCT-2100
(gas- and plasma cutting) is an efficient solution for extraction
the dusts, fumes and gases arising during cutting the steel sheet. Those substances are no-
xious for the environment and harmful for health. Flame cutting table extracts the contamina-
tion at the site of emission. In application with a filtering unit of adequate efficiency the flame
cutting table provides clean air at workplace, protects the environment and health of the wor-
king people.
3.
Reservations of Producer
A
.
Manufacturer accepts no liability
for any consequences following from the operational use
that is in contradiction to the purpose of application.
B
.
Installing of
any additional elements not belonging to the normal device structure (
or acces
-
sory set) is not acceptable.
C
.
Do not undertake
any structural changes or constructional modifications on the device on
one’s own.
D
.
Maintenance and any repair can be performed exclusively by an authorized person.
4.
Technical Data
Table No.1
Type
Surface of the
grate of one
module
[m
2
]
Surface of one
segment grate
[m
2
]
Recommended amount of the
extracted air
SCT
1,5
3,15
for gaseous
cutting
[(m³/h)/m²]
for plasma
cutting
[(m³/h)/m²]
3000
6000
