2
explosion-proof roof fan
WPA-D-N /Ex
04.06.2019
1.
Introductory Remarks
The purpose of the present
Use
and Maintenance Manual is to supply User with directions wi-
thin the range of application, installation, start-up and the use of the
WPA-D-N/Ex
explosion-
proof roof fans
.
Installing, start up and operational use are exclusively admissible after getting acquaint-
ted with the contents of the Use and Maintenance Manual
.
With regard to continuity of work carried on
improvement
of our
products, we reserve for oursel-
ves the revision possibility of the
draft and
technological changes improving their functional fea-
tures and safety.
Construction of the
WPA-D-N/Ex
e
xplosion-proof roof fans
meets
the
requirements of the current
state
of technology
as well as the safety and health assurances included in:
2006/42/EC
Machinery Directive
of the European Parliament
and of the Council of
May 17
th
,
2006 on machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/
2014/35/EC Directive
of the European Parliament and of the Council of February 26
th
, 2014
on the harmonisation of
the
laws of the
Member States relating to the making
available
on
the
market of electrical equipment designed for use within certain voltage limits.
/
Journal of Laws EC L96 of 29.03.2014
/
2014/34/EC ATEX Directive
of
the
European Parliament and of the Council of February 26
th
,
2014 on the
harmonisation
of
the
laws
of
Member States relating
to
equipment
and
protective
systems intended for use in potentially explosive atmospheres.
/
Journal of Laws EC L96 of 29.03.2014
/
Additionally, the appliance meets following harmonized standard:
●
EN ISO-12100:2012
–
“Safety of
machinery
–
Basic concepts, general
principles
for design. Risk assessment and risk reduction”.
●
EN 60204-1:2018-12
–
“Safety
of machinery
–
Electrical equipment of machines.
Part 1: General requirements”.
●
EN ISO 13857:2010
–
“Safety
of
machinery
–
Safe distances
to
prevent hazard
zones being reached by upper and lower limbs”.
●
EN 80079-0:2013/A11:2014
–
“
Electrical appliances in areas of gas explosion
risk.
Part 0:
General requirements”.
●
EN 60079-7:2016-02
–
“Electrical appliances
for areas of gas explosion hazard.
Part 7: Increased safety construction “
e
”.
●
EN 1127-1:2011
–
“
Explosive
atmospheres.
Explosion
prevention
and protec
-
tion
. Basic terminology and methodology”.
●
EN ISO 80079-36:2016-07
–
“Explosive atmospheres
– Part 36:
Non-electrical equip-
ment for
explosive
atmospheres.
Methodology
and requi-
rements.
●
EN ISO 80079-37:2016-07
–
“Explosive atmospheres
–
Part 37:
Non
-electrical equip-
ment
for
explosive
atmospheres.
Non-electrical types of
protection.
Constructional safety
“
c
”
, supervised ignition
“
b
”, immersion in a liquid “
k
”.
●
EN 14986:2017-02
–
“Designing of fans applied
in areas of explosion hazard”
●
ISO 14694:2003+AMD1:2010
–
“Industrial fans – Guidelines on the quality of balancing
and the vibration level.
●
ISO 14695:2008/AC:2017-10
–
“Industrial fans
– Methods
of measurements of
vibration
of fans.
