KLIC-N-KUT KNK Force, User Manual

Page: 192 / 401

192
8.05 Path Offset
•
Path Offset creates an outline or inline of a shape and will delete the original upon clicking on OK . Note that
if you want the original, either make a backup copy or use the Shadow Layer function presented in Section
9.05 .
•
To access Path Offset, select the shape and go to Path>Path Offset:
•
As you increase the Offset , you will begin to see the outline form on your selected shape:
•
After clicking on OK , the Offset will fill with the same color and the original will be deleted:
•
Type controls the style or shape of the offset at the corners. There are three choices:
•
Note that the first choice, Regular , also has a Miter setting which should work in the same way as Miter
affects the Stroke (refer to Section 5.15). However, at this time, it appears that the Miter setting is not
working.
Select from Regular ,
Rounded , and Bevel
Enter size/thickness
for the outline or inline
Check here for inline
versus outline
Controls shape of
offset if
Regular Type
is selected
Click OK when done
Regular Rounded Bevel
Image updates to
show
Offset
Increase Offset