SPEAKER PLACEMENT
These outdoor speakers are designed to mounted
vertically or horizontally. The included mounting bracket(s)
are for installation in outdoor locations which include
gazebos, exterior walls, railings, decks and under building
soffits. It is preferred that speakers be located out of direct
sunlight or extreme weather exposure.
If you are mounting speakers for the purpose of stereo
imaging, we recommend that speaker separation be 50-75%
of the listening distance. Example: for a listening area of
15-20 feet away, the speakers should be 10-15 feet apart
INSTALLING YOUR SPEAKERS
Recommended tools and hardware:
• (2) Mounting screws per speaker
• Screwdriver
• Stud Finder
• Speaker Wire
• Bubble Level
Make sure to locate a stud beneath the surface for
installation of the “C” bracket. Mark the location through
the adjustable keyholes. Pre-drill with a drill bit slightly
smaller than the mounting screws to avoid splitting siding
or stud. For brick or masonry, use a masonry drill bit
and masonry/concrete fasteners, and be sure to follow
directions.
The mounting screws can be installed either with the “C”
bracket in place, or by inserting the mounting screws to
nearly flush with the surface, positioning the keyhole
openings over the screws, then tightening.
WELCOME!
Thank you for purchasing our KLH Faraday F-6600-AW
all-weather speakers. We have constructed these speakers
with the finest quality materials to provide many years of
outstanding performance.
FOR YOUR SAFETY
Important Safety Instructions!
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accor
-
dance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other heat producing appliances
9. ONLY USE attachments/accessories specified by the
manufacturer.
10. DO NOT expose to excess moisture or liquids, and do not
place containers with liquids on top of speakers.
The exclamation point, within an equilateral
triangle, is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accompa-
nying the product.
The lightning flash with arrowhead symbol within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electrical shock to persons.
EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark, Conforms to
European Union EMC Directive 2004/108/EC;
European Union Restriction of Hazardous
Substances Recast (RoHS2) Directive 2011/65/EC;
European Union WEEE Directive 2002/96/EC.
WEEE NOTICE
Note: This mark applies only to countries within the European
Union (EU) and Norway.
This appliance is labeled in accordance with European
Directive 2002/96/EC concerning waste electrical and
electronic equipment (WEEE). This label indicates that this
product should not be disposed of with household waste.
It should be deposited at an appropriate facility to enable
recovery and recycling.
C A U T I O N
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
The mounting screws can be installed either with the “C”
bracket in place, or by inserting the mounting screws to
nearly flush with the surface, positioning the keyhole
openings over the screws, then tightening.
CONNECTING YOUR SPEAKERS
To connect your outdoor speakers, use the proper gauge
wire (See below). Strip wire ends and attach to the back
of the speaker as shown. If you are running new wires,
carefully measure the distance between the amp and
speaker, and allow for 2-3 feet of extra wire for play.
RECOMMENDED WIRE GAUGE
0-15 Feet-16 Gauge
15-30 Feet-14 Gauge
More than 30 Feet-12 Gauge
Once the speaker is attached to wires, slide onto “C”
bracket, and use the threaded caps to secure the
loudspeaker into place. Before tightening all the way,
adjust the positioning of the speaker to your optimum
listening preference.
CARE AND CLEANING
These all weather speakers are made form durable
materials and will provide years of listening for all of your
outdoor applications. Outdoor locations are prone to dust,
dirt and pollution, and your speakers may need periodic
cleaning. A soft, damp cloth or gentle spray from a garden
hose is acceptable, avoiding direct spray through grille
into drivers.
Here are some placement choices we do not recommend
in order to protect your speakers from harsh elements:
• If possible, do not place in direct sunlight.
• Do not use strong abrasives, cleaners or solvents when
cleaning.
• Do not use a pressure washer to clean speaker.
* Do not allow speakers to come in contact with chemicals
or garden sprinklers.
• Do not splash with pool water or water from a hot tub.
AMPLIFICATION
Make sure that amplification matches the speakers’
specified power handling. To avoid damage to speaker, turn
down the volume if you notice distortion or static.
WARRANTY
Warranty begins from purchase date of the item
(invoice date).
For warranty/service issues, please contact your place of
purchase.
Please hold on to your original receipt.
The warranty covers any production and
material defects of purchased product.
The following is NOT COVERED by the warranty:
1. Accidents, misuse, poor maintenance, electrical over-
loads
such as lightning or voltage.
2. No DIY, must be installed by CEDIA-qualified installer.
No abuse.
3. Incorrect installation of product.
4. Altered serial number.
5. Transportation costs for service call.
Replacement item cannot exceed the cost of the item
under warranty. The supplier is responsible for only repair
or replacement.
