RAMHD-230/734
Installation and Operation Manual
PG 20/41
REV: B (4/8/2021)
7.4
Mount Small Horn Driver to Bracket
1.
Attach Small Horn Driver to bracket, per below illustration
a.
Use Horn Separation Hardware kit
i.
Assemble fasteners clean and dry, and finger tighten; they should be tight enough that
horn driver does not move freely, but can be repositioned with some hand force.
ii.
Final tightening will be completed on vehicle.
iii.
Observe correct driver orientation, based on specific vehicle.
Crew Cab Orientation (top slots - bracket facing to right)
Mega Cab Orientation (bottom slots - bracket facing to right)
