SDKIT17-230/734STD
Installation and Operation Manual
PG 9/30
REV: BETA (4/13/2020)
5.
Installation Overview
5.1.
Kit Layout and System Location(s)
SDKIT17-230/734STD consists of following components, located on vehicle, as follows:
ITEM
DESCRIPTION
VEHICLE LOCATION
MOUNTING
METHOD
APPROX.
INSTALL TIME
1
6450RC Air Compressor
***OBA Kit
Underbody, Passenger Side
(near Spare Tire)
Bracket bolts to Frame
rail
2-4 Hours
2
3.0 Gal. Air Tank
***OBA Kit
Underbody, Driver Side
(behind Rear Axle)
Bracket bolts to both
Frame Rails
2-4 Hours
3
230/730 Series Triple
Horn with Air Solenoids
In place of Spare Tire
(in front of rear Bumper)
Bracket bolts to Frame
Crossmember
1-2 Hours
NOTE:
Kleinn SD17OBA-6450 is required to be installed before, or along side this kit.
Click below link to visit Kleinn
’
s website, including downloading instructions.
https://kleinn.com/product/onboard-air-horn-system-for-2017-2018-ford-f-250-f-350/
Figure 1
–
Above Vehicle View Showing Kit Layout (2020 F-350 Crew Cab Short Bed Shown)
2
3
FRONT