SDKIT17-230/734STD
Installation and Operation Manual
PG 21/30
REV: BETA (4/13/2020)
9.3.
Install Air Horn Ore Support Bracket (SD17-306)
–
734STD ONLY
9.3.1.
Remove front most nut, lock washer, and flat washer, then install Support Bracket, as shown below;
ensure it is correctly oriented. Re-install hardware and
final torque to 75 in-lbs
.
NOTE:
This step is excluded from 230STD Plastic Horns, as they do not include Horn Supports.
Figure 8
–
Installing Horn Ore Support Bracket SD17-306 (Exploded view shown)
–
734STD ONLY
Front Bolt
FRONT
