CANX3-KIT
Installation and Operation Manual
PG 9/44
REV: A (9/4/2020)
5.
Installation Overview
5.1.
QUICK INSTALL OUTLINE
For person(s) with experience installing Kleinn bolt-on kits, CANX3-KIT can be quickly installed following
below:
1.
Layout and organize all parts on bench
2.
Select location for Quick Connect Air Coupler
3.
Remove Driver and Passenger Rear Fenders
4.
Install Air Tank Brackets (X3-201, 202, 203, & 204)
5.
Bench assemble Air Fittings and Air Tubing to Air Tank
6.
Install Air Tank
7.
Bench assemble Air Compressor Bracket (X3-101)
8.
Bench assemble Air Compressor and Leader Hose Bracket (X3-102)
9.
Install Air Compressor Bracket (X3-101)
10.
Install Air Compressor
11.
Prepare Front Sway Bar area for Air Horn
12.
Install Air Horn Brackets (X3-301 & 302)
13.
Install Air Horn
14.
Connect air lines and wirings
15.
Install Quick Connect Coupler and route Air Tubing
16.
Route Wiring, install Relay, and install Horn Button
17.
Test system and adjust, as needed
18.
Re-install both rear fenders
