CANX3-KIT
Installation and Operation Manual
PG 40/44
REV: A (9/4/2020)
9.2.
Review suggested Wire Routing for Air Horn System
Figure 38
–
Suggested Wire Routing for Horn, Air Compressor, and Pressure Switch
9.3.
Disconnect Vehicle Battery(s)
9.3.1.
Remove Passenger side seat or move it forward to expose Battery.
Consult Owner’s Manual.
9.4.
Connect Wiring to Relay(s) and Fuse(s), then Attach to Vehicle
9.4.1.
Find a suitable location for supplied relay(s) and fuse(s). Shown below is an example location on rear
firewall behind Passenger seat next to battery. Use supplied self-tapping screws, as necessary.
Figure 39
–
Relay and Fuse location example behind Passenger seat (2019 X3 Turbo RC Shown)
Fuse
Relay
Battery
FRONT
