CANX3-KIT
Installation and Operation Manual
PG 33/44
REV: A (9/4/2020)
8.10.2.
Install Air Compressor on Bracket using hardware included* inside Compressor packaging and place
Fender Washer (
) on both sides of Rubber Feet, as shown below. F
inal torque all bolts
. Connect
previously routed 1/4” Air Tubing to Leader Hose e
nd, and secure all Air Tubing using supplied zip ties.
Figure 25
–
Installing Air Compressor onto Bracket; Exploded View (shown without Leader Hose)
8.10.3.
Install Air Compressor Air Filter onto end of Compressor, per included directions in Compressor package.
Figure 26
–
Air Compressor Filter Remote Tubing shown attached (example vehicle)
Air Filter Inlet
Remote Filter
FRONT
FLAT*
H14 (2)
LOCK*
BOLT*
NUT*
H19 (8)
FLAT*
X3-102
20 In-lbs