1
4
7
2
5
6
70
70°°
ENGLISH
CONTENTS
• 60156 Headlamp
• 3× AAA alkaline batteries
• 2.5 mm hex key
GENERAL SPECIFICATIONS
• Dimensions:
3.31"x2.44"x1.89" 84.1 × 61.9 × 48.0 mm)
• Weight (batteries installed):
5.9 oz. (168 g)
• Battery Type:
3× AAA, 1.5V (Alkaline)
• Batteries Certified For Use With This Headlamp:
• Energizer
®
E92
• Duracell
®
MN2400
• Panasonic
®
AAA LR03
• Battery Life:
Low Mode (75 Lumens):
12 hours,
High Mode (216 Lumens):
5 hours
• Operating Temperature:
32
°
F to 104
°
F (0°C to 40
°
C)
• Storage Temperature:
14°F to 131°F (-10°C to 55
°
C)
• Drop Protection:
6.6 ft. (2 m)
• Ingress Protection (IP) Rating:
IP67
• Standards:
UL 913 7th Edition (US and Canada), CSA 22.2
No.157-92, Reaffirmed 2012, CLASS I, DIV 1&2, GRP ABCD;
CLASS II, DIV 1&2, GRP EFG; CLASS III, TEMP CODE: T4.
File number: E516235.
Specifications subject to change.
Energizer
®
is a registered trademark of Energizer Brands, LLC.
Duracell
®
is a registered trademark of Duracell U.S. Operations, Inc.
Panasonic
®
is a registered trademark of Panasonic Corporation.
WARNINGS
This intrinsically safe product is tested to standards listed. It provides
limited protection under these tested standards. Understand the variety
and duration of environments the product will be exposed to. The user
must consult and get approval from their safety supervisor before using
this product.
Read, understand, and follow these instructions to ensure safe operation.
Failure to observe these warnings can result in injury or even death. The
headlamp is specifically designed to be used on Klein Tools had hats and
safety helmets only. Keep these instructions for future reference.
•
WARNING:
DO NOT place this headlamp on any equipment
that generates heat, open flame, corrosive liquids, unknown
fumes, and vibrations that could damage the headlamp
housing and its components.
•
WARNING:
DO NOT change batteries in hazardous locations.
•
WARNING:
To reduce risk of explosion, DO NOT mix old
and new batteries, different brands of batteries, or different
types of batteries. Replace ALL the batteries together.
•
WARNING:
DO NOT use rechargeable AAA batteries of any
kind - Use standard one-time use Alkaline batteries.
•
WARNING:
Remove the batteries when the headlamp is unused
for a long period of time to prevent battery leakage in the device.
•
WARNING:
DO NOT attempt to repair or modify this
headlamp. There are no user-serviceable parts.
•
WARNING:
Substitution of components may impair
intrinsic safety.
•
WARNING:
DO NOT expose to prolonged direct sunlight
or extreme environmental temperature during operation or in
storage, beyond product specification.
•
WARNING:
Avoid spilling liquids or exposing to dusty
environments on a regular basis-Ingress protection design is
to help minimize risk. The user needs to take proper steps to
maintain the headlamp to ensure maximum ingress protection.
•
WARNING:
DO NOT use this product for recreational or
sport use.
•
WARNING:
DO NOT point this light directly at another
person's eyes.
•
WARNING:
Always use the device following the regulations
of each country.
•
WARNING:
Clean the flashlight only with damp cloth to
avoid static electricity.
FIG. A
FRONT
3
BOTTOM
FIG. B
60156
Intrinsically Safe LED Headlamp -
Instructions
FIG. C
FIG. D
BACK
www.
.com
1.800.561.8187
