Klein Marine Systems, Inc. HydroChart 5000, Operation And Maintenance Manual

Page: 68 / 82

A-2
APPENDIX A General Setup, Configuration and Troubleshooting
HydroChart 5000 Sonar Operations and Maintenance Manual P/N 11210080, Rev. 02
A.1 Basic System Requirements
Although we suggest that you get the fastest available computer at the time of
purchase, it is recommended that you use the following
minimum PC system.
• 2.0 GHz Intel Core 2 Duo Processor
• 1 GB RAM
• 80 GB hard drive
• 8 MB video card
• 100BaseT Ethernet card, such as a 3Com 3C905
• Windows XP or Windows 7
• Power backup module
When running the PC system it is important to make sure that you leave at least
500 MB of free disk space for temporary system disk swap files.
A.2 Basic System Setup
Refer to Figure A-1 for the basic system setup information. Also refer to
“CHAPTER 3: Preparation for Deployment,” for detailed connection information.
A.3 Installing SonarPro
Insert the SonarPro CD into your CD-ROM drive, and then locate the SonarPro
Installation.pdf file in the Documentation folder. Double-click this file to open it.
To install SonarPro double-click the setup.exe file in the SonarPro Disk1 folder
and follow the directions carefully. For an upgrade, double-click the setup.exe file
in the SonarPro Disk1 folder and follow the directions carefully. Multiple versions
of SonarPro can reside on the same computer. When installation is complete,
verify that your startup.ini file or your vxWorks files are located directly in the
klein directory
NOTE
It is very important that you follow the instructions in the
Sonarpro Installation.pdf file. You should also print this file.