background image

SIDE TABLE

klaxon Eagan Side Table

STEP 4

Connect B with C:

STEP 2

Unlock Mode:

Minifix-Drum

Arrow at Hole

Side Before

Inserting Minifix-Screw

STEP 3

Lock Mode:

Note: Make sure all the given points otherwise 

it will not fix properly.

Note: Use Key or Screw Driver.

Tight Minifix-Drum

Clock-wise

Till It Stops

and Fits properly

Note: Tight all Minifix-Drum Properly.

Component Checklist

Installation Steps

STEP 1

MINIFIX SET

DRUM INSERTING

SCREW INSERTING

Installation Instructions

1. This product should only be installed by someone who fully understand the installation instructions.

2. Make sure that the supporting surface will safely support the combined load of the equipment, hardware 

    & components

3. Never exceed the maximum load capacity.

4. Always use assistant or mechanical lifting equipment, if needed, to safely lift & position equipment.

5. Tighten screws firmly, but do not over-tighten. Over-tightening can damage the screw & reduce their 

    holding power

6. This product is intended for indoor use only. Using this product outdoors could lead to product failure 

    & personal injury.

FIX ALL Minifix-Screws and Minifix-Drums:

Note: Make sure 

Drum inserting

as same as above

diagram. 

Note: Tight the screw clock-vise till 

the thread disappear.

SCREW

SCREW HOLDER

DRUM

DOWEL

PUSH DOWN

Reviews: