Installation
Antenna Bracket
•
Klau installation kits will include Dual-Lock and Double Sided tape required for mounting.
However, if you swap the mounting kit to another drone, the double sided tape will need to
be replaced. We recommend using a quality ‘outdoor’ rated tape such as 3M.
•
Prepare the drone by cleaning the area where the bracket will be mounted using the provided
alcohol swabs or an equivalent. Ensure the are is dry before proceeding.
[Figure 1]
•
Double sided tape should be attached to the antenna bracket as shown.
[Figure 2]
•
Find the centre position of the drone then attach the mounting bracket. Care should be taken
to ensure the bracket is mounted in the centre of the drone and that the double sided tape has
adhered properly.
[Figure 3 & 4]
Figure 1:
Figure 2:
Rev1
4
Summary of Contents for Phantom 4
