23
EN
GETTING STARTED
Toaster
Before first use
This product has been packaged to protect it against transportation damage. Unpack
the appliance and keep the original packaging carton and materials in a safe place. It
will help prevent any damage if the product needs to be transported in the future, and
you can use it to store the appliance when it is not in use. In the event that the carton is
to be disposed of, please recycle all packaging materials where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely. Inspect all
parts of the appliance for visual damage. Unwind the power cord to its full length and
inspect the cord and plug for damage. Do not use the appliance if the appliance or its
cord have been damaged or are not working properly. In case of damage, contact our
after sales support centre for advice on examination, repair or return of the damaged
product.
Make sure you have read and understood all instructions and warnings in this manual.
Refer to the Product Overview, opposite, to familiarise yourself with the product and
the operation buttons. Pay particular attention to the safety instructions on the previous
pages.
Remove any adhesive labels and wipe the outside of the toaster with a damp cloth.
Make sure no packaging material is remaining is in the toasting slot and no loose
objects have fallen into the toaster.
Place the toaster on an even and heat-resistant surface. Do not place the toaster where
heat, moisture or high humidity are generated, or near combustible
materials.
Plug the toaster into an appropriate power point and switch on the outlet. The power
socket must be readily accessible so that in an emergency it can be easily switched off
and the toaster unplugged.
Set the browning control to level 4, push down the toasting lever and let your toaster
heat up without any bread.
NOTE: Due to remnants from the manufacturing process burning off, you may notice a
slight burning smell or smoke when first using the toaster. This is no cause for concern.
Ensure good ventilation and let the toaster complete a few toasting cycles until no
more odour or smoke is present. After a short cooling down period, your toaster is now
ready for use. The usage instructions start on the following page. All parts referred to in
the instructions are listed on above page
