The DATA & Ground (S) of all
IN & OUT connectors are
internally inter-connected
S
A B
IN
OUT
S
A B
AES3 in to out
+
con
necto
r on
pro
duct
IS
OLA
TED
S
UB-N
ETW
ORK
Ext
PS
U
AE
S3
lin
k to
ou
t
NETWORK BACKBONE
-
DATA terminated
A
B
S
LIN
K
to
92.5
101.5
24
40
52
Connections
ISOLATOR has three ports: IN; OUT & LINK. Each
port has both RJ45 and “Phoenix” pluggable
screw terminal blocks. These connectors are
connected directly together so either may be
used as convenient.
For example it might be most convenient to
connect ISOLATOR “LINK” to the LINK output
of a VNET device using a standard RJ45 patch
lead while using the Phoenix connections for
the hard wired network “backbone” cabling on
the IN and OUT ports (which are also connected
directly together).
Power
ISOLATOR is powered via its LINK port. As the
LINK port on VNET products provides a source
of suitable power, connecting the LINK of
ISOLATOR to the LINK of the VNET device with
an RJ45 patch cable will power it up.
If the connection from the VNET product is
to use the LINK Phoenix connector of the
ISOLATOR then the following connections need
to be made:
48
49
Quick Start Guide
QFLEX ISOLATOR
