Kiwi Technics Kiwi-30, User Manual

Page: 29 / 66

29
Parameter Editing
SEQ Step Timing 437 Seq Step Timing The Seq Clock Timing can be set to 1 of
13 options. These are:
1=Half Note (48 Clocks/Step)
2=Quarter note (24 Clocks/Step)
3=8th note (12 Clocks/Step)
4=8th note, half swing (14,10 Clocks/Step)
5=8th note, full swing (16,8 Clocks/Step)
6=8th note triplets (8 Clocks/Step)
7=16th note (6 Clocks/Step)
8=16th note, half swing (7,5 Clocks/Step)
9=16th note, full swing (8,4 Clocks/Step)
10=16th note triplets (4 Clocks/Step)
11=32nd note (3 Clocks/Step)
12=32nd note triplets (2 Clocks/Step)
13=64th note triplets (1 Clocks/Step)
Patch Clock 444 Patch Clock If this parameter is set to non zero this
setting will override the Master Clock
Rate while the Tone is loaded. If this
parameter is set to zero the Master
Clock Rate will be used.
Range is 1-127 which is 6-299 BPM
ARP Mode 426 Arp Mode The ARP MODE options are
UP only
DOWN only
UP & DOWN
RANDOM
AS PLAYED
ARP Range 427 Arp Range The ARP Range options are
1-4 Octaves
ARP Step Timing 428 Arp Step Timing The Arp Clock Timing can be set to 1 of
13 options. These are:
1=Half Note (48 Clocks/Step)
2=Quarter note (24 Clocks/Step)
3=8th note (12 Clocks/Step)
4=8th note, half swing (14,10 Clocks/Step)
5=8th note, full swing (16,8 Clocks/Step)
6=8th note triplets (8 Clocks/Step)
7=16th note (6 Clocks/Step)
8=16th note, half swing (7,5 Clocks/Step)
9=16th note, full swing (8,4 Clocks/Step)
10=16th note triplets (4 Clocks/Step)
11=32nd note (3 Clocks/Step)
12=32nd note triplets (2 Clocks/Step)
13=64th note triplets (1 Clocks/Step)
ENV ADSR 411 – 414 Env 1 ADSR
415 – 418 Env 2 ADSR
421 – 424 Env 3 ADSR Range is 0-127
Chorus
441 – Chorus Mode Options are Off, On
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121