Kiwi Technics Kiwi-30, User Manual

Page: 25 / 66

25
Parameter Editing
LFO Parameters 222 – LFO 1 Wave
223 – LFO 1 Rate
224 – LFO 1 Delay
225 – LFO 1 Mode
226 – LFO 1 Sync
227 – LFO 2 Wave
228 – LFO 2 Rate
231 – LFO 2 Delay
232 – LFO 2 Mode
233 – LFO 2 Sync
234 – LFO 3 Wave
235 – LFO 3 Rate
236 – LFO 3 Delay
237 – LFO 3 Mode
238 – LFO 3 Sync
Options are 1=Sine, 2=Triangle,
3=Square, 4=Saw, 5=Rev Saw,
6=Random, 7=Fast Random
Range is 0-127
Range is 0-127
Options are Normal or Plus
Normal will raise and lower parameter
being edited and Plus will only raise the
parameter being edited
0=Free Running
1=Four Notes (384 Clocks/Step)
2=Two Notes (192 Clocks/Step)
3=Whole Note (96 Clocks/Step)
4=Half Note (48 Clocks/Step)
5=Quarter note (24 Clocks/Step)
6=8th note (12 Clocks/Step)
7=8th note triplets (8 Clocks/Step)
8=16th note (6 Clocks/Step)
9=16th note triplets (4 Clocks/Step)
10=32nd note (3 Clocks/Step)
11=32nd note triplets (2 Clocks/Step)
12=64th note triplets (1 Clocks/Step)
Options are 1=Sine, 2=Triangle,
3=Square, 4=Saw, 5=Rev Saw,
6=Random, 7=Fast Random
Range is 0-127
Range is 0-127
Options are Normal or Plus
Options are the same as LFO1
Options are 1=Sine, 2=Triangle,
3=Square, 4=Saw, 5=Rev Saw,
6=Random, 7=Fast Random
Range is 0-127
Range is 0-127
Options are Normal or Plus
Options are the same as LFO1
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121