Kitsound SLAM 2 User Manual Download Page 1

USER MANUAL

SLAM 2

BLUETOOTH

®

SPEAKER

JB. 5108-b / Made in China. © KitSound is a trademark of Kondor Limited, 2018. Christchurch, Dorset, BH23 4FL, UK

kitsound.co.uk

Your product and batteries must be recycled or disposed of properly.  

Please contact your local recycling centre for more information on proper disposal.

Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from 

household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal 

household waste. Your local appliance retailer may operate a ‘take-back’ scheme when you are 

ready to purchase a replacement product, alternatively contact your local government authority 

for further help and advice on where to take your appliance for recycling.

Please recycle this packaging responsibly.

All trademarks are acknowledged as the property of their respective owners.  

Unless otherwise stated their use does not imply that the trademark owner  

is affiliated with KitSound or endorses the products herein.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth

SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks

and trade names are those of their respective owners.

Summary of Contents for SLAM 2







Reviews: