55
Table 5-6 Bottom Hook Dimensions
“k” Measured When New:
_____________________
*These values are nominal since the dimension is not controlled to a
tolerance. The “
k
” dimension should be measured with the hook is new-
this becomes a reference measurement. Subsequent measurements
are compared to this reference measurement in order to determine hook
deformation/stretch. See
Table 5-5
, “Hooks-Stretch”.
Hook
Capacity
Code
Nominal "k" Dimension
*
inch (mm)
(u) Dimension
inch (mm)
(t) Dimension
inch (mm)
Standard
Discard
Standard
Discard
Standard
Discard
RY030
3.54 (90)
3.72 (94.5)
2.28 (58)
2.06 (52.2)
1.77 (45)
1.59 (40.5)
RY050
4.13 (105)
4.34 (110.25)
2.64 (67)
2.37 (60.3)
2.09 (53)
1.88 (47.7)
Summary of Contents for Harrington RY Series
