400mm
4 DRAWER CABINET
BOTT
OM P
ANEL
FRONT P
ANEL
BACK P
ANEL
FRONT P
ANEL
BACK P
ANEL
RIGHT SIDE P
ANEL
LEFT SIDE P
ANEL
BOTT
OM P
ANEL
40mm wood
screws x 80
16mm pan head
screws x 16
28mm wood
screws x 16
14mm wood
screws x 54
Caution: Please ensure all cabinets are screwed into your timber stud wall.
If attaching to concrete, brick, steel or other sub surfaces seek advice from
your hardware specialist. WARNING: Do not allow children to climb on this
furniture – it may topple over and badly injure a child.
Do not place toys or other child appealing items on top of this furniture.
For advice or any other questions you may have, call customer service on:
AU Customers: 1800 666 078 between 8:00am - 6:00pm E.S.T Monday to Friday
NZ Customers: 0800 522 663 between 8:00am - 6:00pm E.S.T Monday to Friday
90° angle
bracket x 1
25mm nails x 20
Stick on caps x 5
Handles x 4
Adjustable
feet x 4
40mm handle
screws x 8
Drawer runners x 4
Kickboard
clips x 2
STEP 8
STEP 7
STEP 9
STEP 4
STEP 5
STEP 6
STEP 2
STEP 3
Attach remaining side panel.
Nail back panel onto the side panels, base panels and
fixed shelf. Screw the back panel into the top support rail.
Screw base panel into side panel.
Screw support rail in position.
STEP 1
BASE P
ANEL
SIDE P
ANEL
SUPPORT R
AIL
SIDE P
ANEL
front of cabinet
25mm
68mm
32mm
89mm
side panel
Attach the front and back drawer box panels to the base drawer
box panel.
Attach the side panels to the rest of the drawer box.
Repeat for the remaining drawers.
Screw the base plates for the adjustable legs in position.
BACK P
ANEL
165mm
Turn the cabinet over. Mark out the dimensions shown.
Attach leg to the base plate. Set the height of the adjustable
legs to 165mm. Repeat for the remaining legs.
VER. 5
1
