6
Install Anti-Tip Bracket
1.
Remove the anti-tip bracket that is taped inside the upper
oven with the package containing literature.
2.
Determine which mounting method to use: floor or wall.
If you have a stone or masonry floor, you can use the wall
mounting method.
3.
Determine and mark edge of range in the cutout space. The
mounting bracket can be installed on either the left-hand side
or right-hand side of the cutout. Position mounting bracket in
cutout so that the right (or left) edge of the bracket is
¹⁵⁄₁₆
"
(2.4 cm) from the marked edge of the range, as shown.
4.
Drill two
¹⁄₈
" (3.0 mm) holes that correspond to the bracket
holes of the determined mounting method. See the following
illustrations.
5.
Using two #12 x 1
⁵⁄₈
" Phillips-head screws provided, mount
anti-tip bracket to the wall or floor.
A. Anti-tip bracket
B. Mark edge of range.
C.
¹⁵⁄₁₆
" (2.4 cm)
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
A
B
C
Floor Mounting
Wall Mounting
A. #12 x 1
⁵⁄₈
" screws
B. Anti-tip bracket
A. #12 x 1
⁵⁄₈
" screws
B. Anti-tip bracket
A
B
A
B
Summary of Contents for YKFED500ESS
Page 14: ...14 Notes ...
Page 15: ...15 Notes ...
Page 16: ...W10694065A 2014 All rights reserved 9 14 Printed in U S A ...
