33
3.
Replace the control knob.
4.
Test the flame by turning the control from the low position to
the high position, checking the flame at each setting.
Moving the Range
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death or
serious burns to children and adults.
When
moving
range,
slide
range
onto
cardboard
or
hardboard
to
avoid
damaging
the
floor
covering.
If
removing
the
range
is
necessary
for
cleaning
or
maintenance:
1.
Slide range forward.
2.
Turn manual shutoff valve to the closed position.
3.
Unplug the power supply cord.
4.
Disconnect the gas supply tubing.
5.
Complete cleaning or maintenance.
6.
Reconnect the gas supply tubing.
7.
Open the manual shutoff valve in the gas supply line.
8.
Plug in power supply cord.
9.
Slide range back so rear range foot is under anti-tip bracket.
10.
Refer to the “Verify Anti-Tip Bracket Is Installed and Engaged”
section to verify engagement.
11.
Check that range is level.
For power supply cord-connected ranges:
Summary of Contents for KSDG950ESS
Page 70: ...REMARQUES ...
Page 71: ...REMARQUES ...
