KitchenAid KGCV465MMT, Technical Education, Page: 21 / 32

4-5
c) Lift the burner base from its bracket as
far as the bottom gas line will allow, and
then remove the gas line.
5. To remove the ignitor from the
TripleTier

Crown burner base:
a) Remove the burner base from the
bracket (see step 4).
b) Slide the clip off the ignitor and remove
the ignitor from the base.
c) Remove the control and front panels
from the unit (see pages 4-6 and 4-7 for
the procedures).
d) Disconnect the orange ignitor wire from
the spark module terminal.
Bottom Gas Line
Slide Clip Off Ignitor
Ignitor Wire From
Spark Module
Orange Wire Connector
Spark Module