KitchenAid KGCV465MMT, Technical Education, Page: 10 / 32

2-2
5. Remove the grates from the cooktop and
the burner caps from the burner bases.
6. To convert the left and right front and
rear burners,
use a 7 mm nut driver, and
remove the orifices . NOTE: Place a small
piece of masking tape along the inside
edge of the nut driver to help keep the
orifice in the driver.
Burner
Orifice
7. To convert the TripleTier

Crown
burner:
a) Remove the four T-20 torx screws from
the burner ring and remove the ring.
b) Remove the three T-20 torx screws
from the burner cover and remove the
cover.
c) Remove the two T-20 torx screws from
the orifice cover and remove the cover.
d) Use a 7 mm nut driver and remove the
two burner orifices.
TripleTier

Crown Burner
Burner Ring
Screw (1 of 4)
Burner Cover
Screw (1 of 3)
Orifice Cover
(2 Screws)
External
Burner
Orifice
Internal
Burner
Orifice