KisanKraft
®
Spark Ignition Internal
Combustion Piston Engines
for Agriculture
KK-PE4-103 / 163 /203
: +91.80. 22178200
Page 15 of 32
2 months to 1 year
Fill with fresh gasoline and add gasoline conditioner
Drain the carburetor float bowl
Drain the fuel sediment cup
STORAGE
If the engine is not used for a long time, do the necessary maintenance before its
storage.
Firstly, take off the fuel tank, drain out all fuel, and clean the dirt and water
inside the tank. Open the fuel cock, unscrew the drain plug at the bottom of
carburetor, drain out fuel in carburetor thoroughly, and then tighten the drain
plug.
Secondly, unscrew the drain plug at the bottom of the crankcase and drain out
the lubricant oil in the crankcase thoroughly, then tighten the drain plug.
Finally, clean the surface of the engine with clean cloth, remove the dirt and
dust etc. Then store the engine in a well-ventilated, dirt-free place.
TRANSPORTATION
Contact with the hot engine or exhaust system can cause serious burns or
fires. Allow the engine to cool down before transporting or storing the engine.
During transport of the engine, turn the engine switch and the fuel valve to
OFF. Keep the engine cool.
TROUBLESHOOTING
1.
The
Engine Can’t Startup
Have the engine checked if it is hard to or cannot be started.
Firstly, check the fuel level of the fuel tank. Turn fuel valve to (2), Fuel should
flow from the drain when the fuel valve is turned ON. Tighten the drain plug.
(Refer to starting of the engine)
2.
Spark Plug
Check the spark plug. Remove the spark plug cap and clean any dirt around it. If the
engine still cannot be started after repeating several times, please see the authorized
dealer. Users are not allowed to dismantle or reassemble the unit by themselves.
3.
Not Enough Power
Check the air-cleaners. Please refer the maintenance inspection book to clear
the air-cleaner.