KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-406D
KK-IC-406D (Electric Start)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 7 of 56
Before Getting Started
Thank you for purchasing our Inter-cultivator.
•
This manual can guide you to solve the problems when you are installing,
manipulating, and repairing the machine. With the continuous innovation and
improvement of the products, the contents in the instruction manual may differ slightly
from the actual situations, your understanding and pardon is highly appreciated. If
you find some problems or have some good suggestions, please do not hesitate to
contact your dealer.
•
No part of this publication may be reproduced without written permission.
•
This manual should be considered a permanent part of the intercultivator and remain
with it if it is resold.
Application
This machine is small, lightweight, multi-functional, and with a high efficiency for
Intercultural/Weeding Operations. It can climb hills, run in water, walk over the field ridges and
ditches, move freely and change the directions easily, and it is especially applicable to various
works in hilly area, dry land, paddy field, orchard, vegetable garden and greenhouse, etc.
Intercultural/Weeding Operations
, ditching & ridging, and transport are the machine’s basic
functions. Moreover, after being equipped with relative devices and tools, it may be used to
pump water, spray water and pesticide, reap the crops, generate electricity, fertilizer, implant
seeds, threshing, cut tendrils, grind something, etc. The machine has a simple structure, can
be easily repaired and its fuel consumption is less. It is your ideal micro agricultural machine.
Safety Instructions
•
Read the instructions carefully. Be familiar with the controls and the proper use of
the equipment.
•
Never allow children or people unfamiliar with these instructions to use the machine.
•
Never work while people, especially children, or pets are nearby.
•
Operator or owner is responsible for accidents or hazards to other people or their
property.
Before starting the machine:
•
Ensure sufficient engine oil.
•
Press clutch during gear shifting.
•
Load after idling the machine for 5 minutes.
•
Close the choke for cold start
•
Keep the choke half open for hot start.
•
Before starting the machine, set shifting bar to the neutral position.
•
When the machine is working, pay attention to the safety!
•
Be careful not to be hurt by the rotary blades!
•
While grasping the reverse handle, the shifting bar must be set to the neutral position.
•
Fuel and lubricant must be clean.
•
Clutch must be broken off when changing the shift.
•
Please read the contents of nameplate on the handlebar carefully before using the
machine.
•
Must install the safety protecting board on the machine before using machine or after
maintenance.
