KISANKRAFT KK-IC-320P, User Manual

Page: 17 / 32

KisanKraft
® INTERCULTIVATOR
KK-IC-320P

: www.kisankraft.com

: info@kisankraft.com

: +91.80. 6835 7800
Page 17 of 32
TROUBLESHOOTING
Common troubles and solutions
Problem Reason Solution
Abnormal noise on
gear Over abrasion of the gear
or improper installation
Reinstall or replace the gear
Gear cannot run
smoothly
Improper installation Reinstall the gear
Overheat of the
machine
Less lube oil in the tank Add lube oil as required
Too narrow space
between gears
Reassembly
Two narrow spaces
between bearings
Readjust
Oil leakage on the
linkage of gear box The connecting bolt is
loosened
Tighten the bolt
Oil leakage Sealing gasket is broken Replace the sealing gasket
Oil leakage on the
output shaft Lip-shaped oil seal is
broken
Replace the oil seal
Oil leakage on the
oil-draining hole
O Ring is broken Replace the O ring
Screw plug is loosened Tighten it accordingly
Oil leakage on the
tank
Small holes on the tank Welding or paint the holes
2. Other troubles and solutions
Problem Reason Solution
Rotary blades are broken
Hit stones or bricks
when using
Replace the blades, pay
attention to avoid the stones
and bricks
Controlling cable is broken
Long-time working
abrasion
Replace the cable
Try to start the engine according to the instructions given above
If the engine still does not start, take the Inter-cultivator to an authorized dealer.