4.
Use button
[Min.]
or
[Max.]
to set the required target value.
5.
Turn unit key to position “1”.
ð
The unit regulates the temperature to the specified target
value.
Monitor the temperature progression!
The unit will not reach the new target
value immediately after the change is
made.
Monitor the temperature progression on
the Display or using optional temperature
documentation (e.g. KIRSCH-PC-KIT).
6.
Read the current temperature and monitor the subsequent
temperature progression until the target temperature is
reached.
Consequences of modified target temperature
As soon as the target temperature is reached, the
temperature warning limits must be adjusted so
that the target temperature is above or below the
temperature warning limits. Otherwise the tem-
perature alarm will be triggered
“Displaying and changing the temperature warning
The set target temperature is saved automatically.
The target temperature is retained after a power
failure and after the unit has been switched off.
7.
When the unit has reached its target temperature, stock the
unit.
6.2.2 Temperature warning limits
6.2.2.1
Function of the temperature warning limits
The temperature warning limits define how much deviation the unit
will tolerate between the actual temperature and the target tem-
perature. The temperature warning limits are unit-specific. They
can be adapted to the requirements of the chilled goods.
The values for the temperature warning limits are set at the factory
and comply with the valid DIN standards for the unit.
Commissioning
Programming the unit > Temperature warning limits
27.05.2021
Refrigerator/freezer MED series
35