3.4 Residual risks
WARNING!
Danger of infection due to inadequate hygiene,
disinfection and sterilisation!
Contact with parts that have not been cleaned,
sterilised or disinfected poses the danger of infec-
tion.
– Comply with the applicable requirements for
personal hygiene, disinfection and sterilisation.
– Clean, disinfect and sterilise the unit before
filling it for the first time.
– Clean, disinfect and sterilise the unit in line with
this instruction manual during operation.
WARNING!
Danger due to escaping refrigerant!
The refrigerant used in the unit is explosive and
pressurised, and can cause serious injury if it
comes into contact with the eyes or skin.
– During transport and set-up, do not bend or
pierce the tubing and the evaporator.
– Do not damage the surface coat (scratching it
off, for example).
– Wear safety glasses and protective gloves when
handling the refrigerant circuit.
WARNING!
Danger due to hot surface!
The marked areas of the unit can cause severe
skin injuries if touched.
– Do not touch areas of the unit marked in this
way.
– These areas are very hot and can still cause
burns several hours after the unit has been
switched off.
Infection of the user
Escaping refrigerant
Hot surface
Safety
Residual risks
27.05.2021
Refrigerator/freezer LABO series
24
