22
INSTALLATION
INSTALLATION — BAY WINDOWS
Step J. Rack and Secure the Right Bay Panel(s)
■
■
Repeat Step G for the right panel(s).
NOTE:
A center screw may be needed between the L-frame sides to maintain an even bead between the L-frames from top to
bottom. Remember to always pre-drill to avoid splitting the wood or hybrid material.
■
■
Perform any necessary finish work to complete the installation (see page 24).
Arch Top and Angle Top Panels
Step A. Assemble the Frame
IMPORTANT:
Be careful when moving assembled frames; support weight evenly to avoid placing torque on the joints.
1.
Use Hoffmann keys (see image below) to connect the bottom corners of the frame. If necessary, tap the keys securely in place
using a rubber mallet, or a standard hammer and wood block.
2a.
If the curved or angled segments of the frame
were spliced using a lap joint, align two segments and
attach them using the provided screws.
Hoffman
Key
INSTALLATION — ARCH TOP AND ANGLE TOP PANELS
