
4
© MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210607001
CE Marking
CE Certification
NOTICE
Every effort is made to ensure that the 455 balanced regulators, and other KMDSI
regulators, are interchangeable among the wide variety of helmets and masks we pro-
duce. Please be aware that the final alignment of the regulator may vary from unit to
unit, and this in no way will affect its function or performance.
The original language of the Kirby Morgan Manu-
als is English. Translation into other languages will
be provided upon request. KMDSI may charge a
fee for these services.
NOTE
The tools required to remove the SuperFlow
®
350 regulator and install the 455 Balanced
regulator into the helmet shell are the same
and will only be listed once at the beginning
of this installation guide.
The following instruction is valid for the following
products:
SL 17C
KMB 18**
SL 27*
KMB 28**
KM 37
KM 37SS
KM 57
KM 77
*Mounting to the SL 27
®
requires installation by
a dealer certified in fiberglass repair (for SL 27
®
helmets built before October 2015).
**Pre ’99 KMB 18s and pre 2004 KMB 28s will not
accept the 455 balanced regulator.
1.1 CE Certification
The helmet has been tested and conforms to the
performance requirements as set forth in An-
nex II of Regulation (EU) 2016/425 and, as far as
applicable, the EN15333-1 (class B). It is fully CE
marked with the 455 balanced demand regulator
and oral nasals P/N 510-690 and P/N 510-747.
NOTE
The sticker (CE mark) inside the helmet
or BandMask
®
regards only the helmet/
BandMask
®
without the regulator.
Category of PPE: III
B
WARNING
The helmet has been tested with air
and CE certificated for use with air up
to 50 meters. Compressed air must be
compliant with the EN 12021.
All the tables reporting the technical
data and the pressure of use are rela-
tive to compressed air.
1.1.1 CE Marking
On the inside of the helmet shell or BandMask
®
frame the CE mark is affixed.
0477
HELMET MODEL:
KIRBY MORGAN
DIVE SYSTEMS. INC.
1430 Jason Way,
Santa Maria, CA 93455
YEAR OF PRODUCTION:
EN15333-1
CLASS B
CE Mark on Helmets
0477
KIRBY MORGAN
DIVE SYSTEMS, INC.
1430 Jason Way,
Santa Maria, CA 93455
EN15333-1
CLASS C
BANDMASK
®
MODEL:
YEAR OF PRODUCTION:
CE Mark on BandMasks
®
In the mark the data reported are the following:
1.
The name and the address of the manu-
facturer;
2.
Harmonized reference standard:
EN 15333-1;
3.
PPE model;
4.
The year of production;
5.
CE marking:
;