Kipp & Zonen CVF4 Instruction Manual Download Page 2

2

 

 

1.

 

Important user information 

 

Dear customer, thank you for purchasing a Kipp & Zonen instrument. It is essential that you read this 
manual completely for a full understanding of the proper and safe installation, use, maintenance and 
operation of your new CVF4 Ventilation Unit. 

We understand that no instruction manual is perfect, so should you have any comments regarding this 
manual we will be pleased to receive them at: 

Kipp & Zonen B.V. 
Delftechpark 36, 2628 XH Delft, - or 
P.O. Box 507, 2600 AM Delft, 
The Netherlands 
+31 15 2755 210  

[email protected]

 

www.kippzonen.com

  

 

Warranty and liability 

Kipp & Zonen guarantees that the product delivered has been thoroughly tested to ensure that it meets its 
published specifications. The warranty included in the conditions of delivery is valid only if the product has 
been installed and used according to the instructions supplied by Kipp & Zonen. 

Kipp & Zonen shall in no event be liable for incidental or consequential damages, including without 
limitation, lost profits, loss of income, loss of business opportunities, loss of use and other related 
exposures, however incurred, rising from the faulty and incorrect use of the product. 

Modifications made by the user may affect the instrument performance, void the warranty, or effect the 
validity of the CE declaration or other approvals and compliances to applicable International Standards. 

Copyright © 2019 Kipp & Zonen B.V. 

All rights are reserved. No part of this publication may be reproduced, stored in a retrieval system or 
transmitted, in any form or by any means, without authorisation by Kipp & Zonen. 

Kipp & Zonen reserves the right to make changes to this manual, brochures, specifications and other 
product documentation without prior notice. 

 

Manual document number:   V2007-01 

Publication date: 

July 2020 

 

 

Summary of Contents for CVF4


















Reviews: