background image

-

-

6. STOPPING THE ENGINE

To stop the engine in an emergency, turn the engine switch to the OFF position.

IN NORMAL USE:

1. Turn the engine switch to the OFF position.

2. Switch off the connected equipment and pull the inserted plug.

3.Turn the fuel valve lever to the OFF position.

Be sure both the fuel cap vent lever and the engine 
switch are  in "OFF" position  when stopping, 
transporting and/or storing the generator.

CAUTION

7. MAINTENANCE

NOTE:  (1) Log hours of operation to determine proper maintenance.

(2) Service more frequently when used in dusty areas.
(3) These items should be serviced by an authorized dealer, unless the owner has the proper tools 

and is mechanically proficient. See the Shop Manual.

ITEM
Perform at every indicated month
or operating hour interval, which-
ever comes first.

REGULAR SERVICE PERIOD(1)

Fuel line 

Check

Check level

Change

Check

 Clean

Clean-adjust 

Clean 

Check-adjust

Clean 

Engine oil

Air cleaner

Spark plug

Sediment cup

Valve clearance

Fuel tank and filter

EVERY

YEAR

OR

200 HRS

EACH 

USE

FIRST 

MONTH

 OR 

20HRS

EVERY 3 

MONTHS 

OR 

50HRS

EVERY 6

MONTHS

OR 

100 HRS

(2)

(3)

Every 2 years (Replace if necessary) (2)

Maintenance Schedule

CAUTION

WARNING

(3)

The purpose of the maintenance and adjustment schedule is to keep the generator in 
the best operating condition.
Inspect or service as scheduled in the table below.

Shut off the engine before performing any maintenance. If 
the engine must be run, make sure the area is well  
ventilated. The exhaust contains poisonous carbon 
monoxide gas.

Use genuine our parts or their equivalent. The use of 

replacement parts which are not of equivalent quality 
may damage the generator.

2. Start the engine

The DC receptacle may be used while the AC power is 

in use.

An overloaded DC circuit will trip the DC circuit 

protector. If this happens, wait a few minutes before 

pushing in the circuit protector to resume operation.

Low oil alarm system

The low oil alarm system is designed to prevent engine damage caused by an 

insufficient amount of oil in the crankcase. Before the oil level in the crankcase falls 

below a safe limit, the low oil alarm system will automatically shut down the engine(the 

engine switch will remain in the ON position).

If the low oil alarm system shuts down the engine, the low oil alarm indicator light(red) 

will come on when you operate the starter, and the engine will not run. If this occurs, 

add engine oil.

NOTE

Summary of Contents for IG3000E

















Reviews: