FP 75 E
Issue: 08/2012
20
3 .2 .4 Lens Holder
»
The lens holder can be fed with a lens.
»
For inserting a lens loosen clamping screw (white arrow), put in the lens and then
tighten the screw again.
»
Focusing can be done manually (black arrow) or optionally electronically.
3 .2 .4 .1 Manual Focusing on the Lens Holder
Turn the focusing knob (black arrow) to move the lens holder.
3 .2 .4 .2 Electronically Controlled Lens Holder Focusing (option)
When operating the focus controls, the focus motor rotates a shaft with a eccentric
segment at the end. That eccentric is located between the focus shaft and the lens
holder and thus shifts the lens holder fore and aft as it rotates.
X
NOTE
Z
Electronic focusing can only be carried out with open dowser.
Z
Adjusting the lens holder, see chapter 6.4.
Z
Modifying the lens holder for different formats, see chapter 3.2.8.
