FP 25/30/50 E
Film Gate Components
Issue: 06/2011
21
3 .2 .3 Single Aperture Plates (only with manual lens turret or lens holder)
Push the single aperture plate into the film gate until the stop is reached and the
aperture plate snaps into position.
3 .2 .4 Aperture Changer (option, only with electronic lens turret)
The aperture changer is suitable for automatically changing the aperture when the
corresponding format key has been pressed. It works together with an electronically
controlled lens turret. By activating a format button the aperture together with the lens
is changed.
Aperture changer
Aperture
Drive pin
(with knurled nut installed)
• Push the aperture into the film
gate and place the aperture
changer drive pin into the hole on
the aperture.
• Tighten the knurled nut on the
drive pin.
Hole for drive pin
1:1.66 aperture
1:1.85 aperture
1:2.39 aperture
2
3
1
2
3
1
4
Summary of Contents for FP 25 E PREMIERE
