8.3.2.4 Service Port
Set the port values for Telnet/HTTP/RTP on this page.
Field Name
Explanation
Web Server Type
Specify Web Server Type – HTTP or HTTPS
HTTP Port
Port for web browser access. Default value is 80. To enhance
security, change this from the default. Setting this port to 0 will
disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090,
the accessing address is http://192.168.1.70:8090.
HTTPS Port
Port for HTTPS access. Before using https, an https authentication
certification must be downloaded into the phone.
Default value is 443. To enhance security, change this from the
default.
Telnet Port
Port for Telnet access. The default is 23.
RTP Port Range Start
Set the beginning value for RTP Ports. Ports are dynamically
allocated.
RTP Port Quantity
Set the maximum quantity of RTP Ports. The default is 200.
Notes:
8. Any changes made on this page require a reboot to become active.
9. It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.
Values less than 1024 are reserved.
10. If the HTTP port is set to 0, HTTP service will be disabled.
Summary of Contents for KT52IP
Page 1: ...KT52IP VoIP Phone User Manual...
Page 40: ......
Page 61: ......
Page 66: ...except for VoIP accounts SIP1 2 and IAX2 and version number...
