Kingston Technology MobileLite Wireless G2, Setup Manual

Page: 61 / 103

67
To use this function, follow these steps:
If the device is powered on, press and hold the power button
for three seconds or until Power LED turns off.
Attach your mobile device to the USB port on MobileLite
Wireless (using its own Type-A USB power cable.)
With MobileLite Wireless powered off, press the power
button once and release; do NOT press and hold the power
button, as this will turn the wireless broadcast function on.
Once the power LED begins to flash, the unit is ready and
your mobile device should be charging.
Charge Your Smartphone
Battery Backup
In addition to being its own Wi-Fi network, MobileLite Wireless can also be used as a battery backup. This feature allows
you to charge your smartphone using the built-in USB port.