Kingston Technology DataTraveler, User Manual

Page: 30 / 246

Document No. 48000012-001.A02 DataTraveler
®
Vault - Privacy Page 29 of 29
DTVP Linux Commands
Command Syntax* Description
dtvp_about ./dtvp_about Displays serial no., firmware, and application version of
DTVP
Can be executed whether user is logged into the DTVP
or not
dtvp_forgotpassword ./dtvp_forgotpassword Resets the DTVP and allows you to create a new
password
Can be executed only when user is NOT logged into the
DTVP device
(All data stored on the secure data partition will be lost)
dtvp_initialize ./dtvp_initialize Initializes the DTVP and prepares device for first use
Executed prior to first use only
dtvp_login ./dtvp_login Prompts for DTVP password to log user into secure data
partition
Can be executed only when user is NOT logged into the
DTVP device and only AFTER the device has been
initialized
dtvp_logout ./dtvp_logout Logs user out of DTVP and closes secure data partition
Can be executed only when user is logged into the DTVP
device
*
Note: To execute the DTVP Linux commands, you must open a “Terminal” application window
and navigate to the folder where each of the files exist. Each command must be preceded by
the following two characters: ‘
./
’ (a period and a forward slash as indicated in the table above.)