BlueTruckMaster® – Operating and safety manual
9.
FILLING A TANK
The tank should be filled through inlet (see Point 5) using dispensing noz-
zles, e.g. being the part of dispensing units in gas stations.
It is forbidden to fill the tank directly from a tanker. Moreover,
BlueTruckMaster® can be filled only with AdBlue®. The maxi-
mum filling rate is 100 l/min and it should not be exceeded. Pay
attention to the vent and check if it is not blocked when filling a tank.
10.
CONNECTING THE PUMP
Before refuelling, the pump must be connected to a power source. Depend-
ing on the specifications, BlueTruckMaster® can be equipped with a pump
powered by a 12 V DC and/or 24 V or 230 V AC. The supply voltage of the
pump must be consistent with the voltage stated on the pump nameplate.
Summary of Contents for BlueTruckMaster 200
Page 2: ......
