KINGSLEY~BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE SC-25
LIFT OUT TRAY
DRAWERS
TOP FRAME BOTTOM FRAME
DRAWER FRAME END FRAME WITH WING
END FRAME W/O WING
* NOTE
A TENON
B MORTISE HOLE
WHEELS
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE:
During assembly of the furniture please match all joints with the corresponding
letters or numbers stamped on the furniture.
STEP-II
Find the END FRAME W/O WING (should be the
one with numbers stamped on it). Lay this END
FRAME down first. Matching the numbers on the
END FRAME with those on the TOP FRAME,
BOTTOM
FRAME,
HANDLE
BARS
and
DRAWER FRAME, BOTTLE RACK carefully line up all parts. Using a rubber mallet,
evenly drive all the tenons into the mortise holes as shown in the assembly photos.
